HPMC: "Performance Multiplier" for Adhesives and Coatings

Unveiling the Key Additives in Building Chemistry

As the preferred functional additive for the world's TOP50 building materials companies, hydroxypropyl methylcellulose (HPMC) reshapes the performance standards of adhesives and coatings through three core technologies:

I. Three major innovations in the field of adhesives

1. Strong bonding + anti-slip

In tile adhesives, HPMC increases the bonding strength by more than 40% (EN1348 standard), and its molecular chain forms a 3D network structure with cement:

- Open time extended to 30 minutes (ordinary adhesives only 15 minutes)

- Anti-slip value ≤0.5mm (national standard requirement ≤0.7mm)

Application case: Shanghai Tower uses super high-rise special tile adhesive containing HPMC, which withstands the test of a level 12 typhoon without falling off

2. Intelligent water retention system

By adjusting the viscosity of HPMC (40,000-150,000 cps), it can achieve:

- Thin layer construction (1mm) water retention rate > 92%

Thick layer construction (20mm) water retention rate > 88%

Avoid cracking caused by rapid evaporation of water, and increase compressive strength by 25% in 28 days

3. Construction-friendly design

Unique pseudoplastic characteristics:

- Viscosity drops by 50% when stirring for easy coating

- Viscosity recovers when standing to prevent sagging

Increase construction efficiency by 30% and reduce material loss by 15%

II. 4-dimensional breakthrough in the coating industry

1. Three-dimensional protection system

In building exterior wall coatings, HPMC forms a continuous protective film:

- Weather resistance: passed 2000 hours QUV accelerated aging test

- Moisture permeability: ≥85g/(㎡·24h), avoid condensation

- Crack resistance: can withstand 0.3mm crack expansion and contraction of substrate

2. Intelligent film-forming technology

By adjusting the amount of HPMC added (0.1%-0.3%):

- Brushing resistance reduced by 40%

- Leveling time extended to 8 minutes

- Film thickness uniformity deviation <5%

3. Pigment suspension stability

HPMC aqueous solution produces >2000mPa·s structural viscosity:

- Prevents heavy fillers such as titanium dioxide from settling

- Storage stability >12 months (no stratification and agglomeration)

4. Environmental protection double certification

- Zero VOC emission (GB18582-2020)

- Biodegradation rate >98% (OECD301B standard)

3. Why do engineers around the world choose HPMC?

1. Precision control system

- Viscosity gradient: optional from 40,000 to 200,000 cps

- Gel temperature: 60-90℃ customizable

- Dissolution rate: cold water instant dissolution type/slow dissolution type

2. Economic benefit ratio

The cost of adding materials per ton is 15-50 yuan, which can achieve:

- Construction efficiency increased by 20%-40%

- Rework rate reduced to less than 1%

- The shelf life of materials is extended by 3-6 months

3. Global engineering verification

- Dubai Burj Khalifa: Exterior wall coatings are resistant to high temperatures of 70°C

- Hong Kong-Zhuhai-Macao Bridge: Concrete joint glue is resistant to chloride ion corrosion

- Beijing Daxing Airport: Self-leveling system is constructed on a single day of 5,000 square meters

---

Three ironclad evidences for choosing HPMC:

✅ China Building Materials Academy Test Report (No.2023-HPMC-001)

✅ EU REACH Registration Certification (01-2119487897-38)

✅ More than 2,000 engineering application cases worldwide

From super high-rise buildings to deep-sea projects, HPMC is redefining the performance boundaries of modern building chemistry. Choosing HPMC is not only choosing an additive, but also the ultimate guarantee of building quality.