Daily chemical detergent thickener cold water instant hydroxypropyl methylcellulose HPMC, instant hydroxypropyl methylcellulose is different from the hot melt type in that it will disperse in cold water, but it will not dissolve after dispersion. It takes time to form a transparent viscous state.
Instant hydroxypropyl methylcellulose can not only be applied to putty powder and mortar, but also used in liquid glue and paint. This hydroxypropyl methylcellulose product will not stick immediately when placed in water, allowing various materials to be mixed evenly.
Physical properties of instant hydroxypropyl methylcellulose:
Appearance: White or light yellow fibrous, granular or powdery solid Loss on drying ≤5.0%, PH 4.0-8.0 Mesh: 98% pass 100 mesh Viscosity: 100000-200000 mpa.s
Granularity; the pass rate of 100 mesh is greater than 98.5%; the pass rate of 80 mesh is 100%. Particle size of special specifications is 40~60 mesh.
Apparent density: 0.25-0.70g/cm (usually around 0.5g/cm), specific gravity 1.26-1.31.
Surface tension: 2% aqueous solution is 42-56dyn/cm.
Discoloration temperature: 190-200°C
Daily chemical industry: used as shampoo, shower gel, as thickener, our company's instant products, good dispersion in cold water, no agglomeration, no lumps, no stratification, stable properties, very suitable for shampoo products Production. Used in the generation of laundry detergent, it has the effect of thickening, making the appearance of laundry detergent soft and delicate, and has a certain mildew resistance, which is not easy to deteriorate.
Instant-type hydroxypropyl methylcellulose disperses quickly when it encounters cold water and disappears in the water. At this time, the liquid has no viscosity. After about 3-5 minutes, the viscosity of the liquid increases, forming a transparent viscous colloid.
Instant type: the application range is wider, it can be used in putty powder and mortar, as well as liquid glue and paint, there is no taboo
Hydroxypropyl methylcellulose (HPMC) for detergent and laundry detergent is an odorless, tasteless, non-toxic white powder. After fully dissolving in water, it will form a transparent viscous colloid.
"Dezny" daily chemical grade special hydroxypropyl methylcellulose HPMC viscosity specification is 200,000 viscosity. It is HPMC for custom-made transparent detergent. The light transmittance is above 90. There is very little short fiber in dissolved water. After ordinary HPMC is completely dissolved, there will be many short fibers floating in the water. Affects perception and transparency.